Kingston FURY KF564C32BB-32 is a 4G x 64-bit (32GB)DDR5-6400 CL32 SDRAM (Synchronous DRAM) 2Rx8, memorymodule, based on sixteen 2G x 8-bit FBGA components per module.The module supports Intel® Extreme Memory Profiles (Intel®XMP) 3.0. Each module has been tested to run at DDR5-6400 at alow latency timing of 32-39-39 at 1.4V. The SPDs areprogrammed to JEDEC standard latency DDR5-4800 timingof 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contactfingers. The JEDEC standard electrical and mechanicalspecifications are as follows:
Category
Details
Model
KF564C32BB-32
Capacity
32GB (4G x 64-Bit)
Type
DDR5-6400 CL32 288-Pin DIMM
Memory Organization
2Rx8, sixteen 2G x 8-bit FBGA components per module
XMP Support
Intel® XMP 3.0
Default SPD Timing
DDR5-4800 CL40-39-39 @ 1.1V
XMP Profile #1
DDR5-6400 CL32-39-39 @ 1.4V
XMP Profile #2
DDR5-6000 CL30-36-36 @ 1.4V
XMP Profile #3
DDR5-4800 CL38-38-38 @ 1.1V
Power Supply
VDD = 1.1V Typical, VDDQ = 1.1V Typical, VPP = 1.8V Typical, VDDSPD = 1.8V–2.0V
On-Die ECC
Yes
Height
1.37" (34.9 mm) w/heatsink
CL (IDD)
40 cycles
Row Cycle Time (tRCmin)
48 ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin)
295 ns (min.)
Row Active Time (tRASmin)
32 ns (min.)
UL Rating
94 V-0
Operating Temperature
0°C to +85°C
Storage Temperature
-55°C to +100°C
ValueRAM's KVR32S22D8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22 22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features:
Power Supply:
VDD = 1.2V Typical
VDDQ =
1.2V Typical
VPP =
2.5V Typical
VDDSPD =
2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB:
Height 1.18” (30.00mm)
RoHS Compliant and Halogen-Free
Key specifications
Memory:
32GB DDR4
Speed:
3200MHz (PC4-25600)
Latency:
CL22
Form Factor:
288-pin DIMM
Organization:
2Rx8 (dual-rank, X8 chip organization)
Voltage:
1.2V
Standard:
Non-ECC, Unbuffered
Compatibility:
Desktops
Operating Temperature:
0∘𝐶
+85∘𝐶
RoHS Compliant:
Yes
About this item
All ValueRAM memory is 100% tested
ValueRAM is ideal for system builders and those who buy memory by specification
Please always check the compatibility with manufacturer before purchasing this DRAM module
Designed and tested to meet JEDEC industry standards
All Kingston products are backed by the support of a company with a 30+ year track record of product reliability and a commitment to our customers
This document describes KVR32N22S8/8, a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to the JEDEC-standard DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers
Specifications:
Power Supply
VDD = 1.2V Typical
VDDQ
1.2V Typical
VPP
2.5V Typical
VDDSPD
2.2V to 3.6V
On-Die Termination
Nominal and dynamic ODT for data, strobe, and mask signals
LPASR
Low-power auto self refresh
DBI
Data bus inversion for data bus
VREFDQ
On-die generation and calibration
Rank
Single-rank
SPD EEPROM
On-board I2 serial presence-detect
Internal Banks
16 banks; 4 groups of 4 each
Burst
Fixed BC4 and BL8 via MRS
OTF
Selectable BC4 or BL8 on-the-fly
Topology
Fly-by
Bus
Terminated control command and address bus
PCB Height
1.23” (31.25mm)
Compliance
RoHS Compliant and Halogen-Free
