Power capacity : 360 W / 650 VA
Battery Backup : 4 battery backup with surge protection outlets for multi-device power protection
Automatic Voltage Regulation (AVR)
Boost and Trim” AVR instantly corrects voltage fluctuations without using the battery, saving battery life for power outages
Circuit Breaker Reset
Push the circuit breaker button to reset for easy recovery from circuit overloads, protecting the UPS and connected electronics from electrical damage
Automatic Diagnostic Testing
Periodic battery self-test ensures early detection of a battery that needs to be replaced, ensuring your unit is ready when you need it
Generator Compatible
Provides clean instant battery power to prevent frequency variations from affecting the connected load
Specification
Details
UPS Model
BVX650I-PH
Power Capacity
360 W / 650 VA
Nominal Output Voltage
230 VAC ± 10%
Topology
Line Interactive
Transfer Time
4–6 ms typical, 10 ms max
Output Connections
(4) NEMA 5-15R Battery Backup Outlets
Nominal Input Voltage
230 VAC
Input Voltage Range
140 – 300 VAC
Frequency
50 Hz / 60 Hz ± 5 Hz
Input Circuit Breaker
5 A
Cord Length
1.2 m
AC Power Surge Protection
All Outlets
LED Indicators
LED Status display with online : on battery
Alarms
On battery : low battery : overload continuous tone alarm
Battery Type
Maintenance-free, sealed lead-acid battery, leak proof
Dimensions (H x W x D)
14.2 cm x 10.1 cm x 30 cm
Audible Noise at 1m from Unit
40 dBA max
Electrical and performance
Output Power Capacity:
1000VA / 600 Watts
Topology:
Line Interactive
Nominal Input Voltage:
230V
Nominal Output Voltage:
230V
Waveform Type:
Stepped approximation to a sine wave
Transfer Time:
6ms typical / 10ms maximum
Input Frequency:
50/60 Hz +/- 5 Hz auto-sensing
Output Frequency:
50/60 Hz +/- 1 Hz unsynchronized
Input Voltage Range:
170V – 280V
Surge Energy Rating:
156 Joules
Automatic Voltage Regulation (AVR):
Yes
Battery
Battery Type:
Maintenance-free sealed Lead-Acid
Battery Voltage:
12V
Typical Recharge Time:
8 hours
Expected Battery Life:
3–5 years
Replacement Battery:
RBC17
Physical and environmental
Outlets:
4 universal receptacles (battery backup & surge protection)
Dimensions (H x W x D):
9.25 cm x 16.05 cm x 30.5 cm
Net Weight:
5.7 kg
Color:
Black
Audible Noise:
40.0 dBA at 1 meter
Operating Temperature:
0°C to 40°C
Standard Warranty:
2-year
Power specifications
Rated Power:
1800W / 2000VA
Output Voltage:
230V (configurable for 220V and 240V)
Input Voltage:
230V (with input voltage limits of 110–285V for half load and 180–285V for full load)
Wave Type:
Pure sine wave
Efficiency:
88% at full load
Bypass:
Internal bypass (automatic and manual)
Input/Output Connections:
1x IEC C14 input and 4x IEC C13 outputs
Key features
LCD Interface:
Provides detailed status information and configuration
Intelligent Card Slot:
Allows for network management card installation
ECO Mode:
Energy-saving mode for high efficiency
Battery:
48V battery voltage, with a 4-hour recharge time to 90% capacity
Communication:
USB and RS-232 ports are included
Certification:
Complies with safety standards like EN/IEC 62040-1 and EN/IEC 62040-2
Physical specifications
Form Factor:
Tower
Dimensions:
40 cm×14.5 cm×23.8 cm40 cm cross 14.5 cm cross 23.8 cm
40 cm×14.5 cm×23.8 cm
(LWH)
Weight:
17 kg
Color:
Black (RAL 7010)
Specifications
Voltage:
220V input and output
Wattage:
500 watts
Maximum Capacity:
50VA (Volt-Amperes)
Fuse:
5A
Sockets:
3 x 220V outlets
Casing:
Compact, powder-coated metal case
Specifications:
Power Capacity:
2200VA / 1200 Watts
Topology:
Line-Interactive
Output Voltage:
230V (On Battery: 230V +/- 10% at 100% load)
Waveform:
Stepped approximation to a sinewave
Output Connections:
4 Universal outlets for battery backup
Automatic Voltage Regulation (AVR):
Corrects voltage fluctuations by increasing or decreasing output voltage without using the battery, conserving its power.
Data Line Protection:
Includes RJ45 Gigabit ports for network surge protection
Runtime:
Typical Backup Time (½ Load):
8.5 minutes
Typical Backup Time (Full Load):
1 minute
Batteries:
Type:
Maintenance-free, sealed Lead-Acid
Recharge Time:
Approximately 8 hours for a typical recharge
Management:
Features intelligent battery management, with a periodic self-test to detect failing batteries and provide early warnings for replacement.
Cold-start capable - Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR) - Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Transformer-block spaced outlets - Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design - Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
PROTECTION
Battery backup and surge protection - Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Battery and surge protected outlets - Back up and protect your hardware and data during power outages, surges and spikes.
MANAGEABILITY
LED Indicators - Provide easy-to-read status of the unit and utility power conditions.
Audible alarms - Provides notification of changing utility power and UPS power conditions
Specifications
Power Capacity:
1200VA / 650 Watts
Voltage:
230V (Nominal Input & Output)
Topology:
Line-Interactive
Output Connections:
1 x IEC 320 C13 (Battery Backup)
4 x Universal (Battery Backup)
Waveform Type:
Stepped approximation to a sinewave
Transfer Time:
6 ms typical / 10 ms maximum
Runtime:
5 minutes at 50% load
Features
Automatic Voltage Regulation (AVR):
Corrects voltage fluctuations without draining the battery.
Computer Grade Surge Protection:
Protects against damaging power surges and spikes.
Quick Mute:
Allows for silencing of audible alarms during a power event.
LED Indicators:
Provides easy visual confirmation of the UPS's functional status.
Design:
Slim and modern, can be placed upright, flat, or wall-mounted.
Additional Information
Input Connection:
IEC 60320 C14
Cord Length:
1.2 meters
Battery:
Maintenance-free sealed Lead-Acid battery
Regulatory Approvals:
CE, CB, EN/IEC 62040-1, EN/IEC 62040-2.
Specifications
Power Capacity:
800VA / 450 Watts
Voltage:
230V nominal input and output
Output Connections:
4 Universal Receptacles (all battery backup)
Topology:
Line Interactive
Waveform Type:
Stepped approximation to a sinewave
Transfer Time:
6ms typical, 10ms maximum
Input Connection:
IEC-320 C14
Battery:
Maintenance-free sealed Lead-Acid
Features & Management
Automatic Voltage Regulation (AVR):
Corrects for voltage fluctuations without switching to battery power.
Universal Outlets:
Standardized connections for various plug types.
Control Panel:
LED Status display for power conditions (On Line, On Battery).
Audible Alarms:
Provides alerts for low battery, overload, and being on battery.
This APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 1000VA double-conversion on-line tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SRV comes with IEC 320 C14 input and 3x IEC 320 C13 outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The SRV UPS is compatible with replacement battery cartridge APCRBCV203. The Easy UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.
UPS Specifications – Model: SRV
Feature
Specification
Model
SRV
Output Capacity
1000VA, 230V, 900W / 2000VA, 230V, 1800W / 3000VA, 230V, 2700W
Output (on battery)
220–240V, 50/60Hz ± 0.5Hz
Main Input Voltage
230V
Other Input Voltage
220–240V
Main Output Voltage
230V
Other Output Voltage
220–240V
Rated Power (W)
900W, 1800W, 2700W
Rated Power (VA)
1000VA
Input Connection Type
IEC 60320 C14
Output Connection Type
3 × IEC 60320 C13
Cable Length
1.5 m
Number of Cables
1
Provided Equipment
1 × IEC 60320 C13 to Schuko cable, 1 × IEC 60320 C13 to C14 cable, 1 × USB cable, 1 × RS‑232 configuration cable, user manual
Battery Type
Lead‑acid
Battery Voltage
24V
Number of Battery Filled Slots
0
Number of Battery Free Slots
0
Battery Recharge Time
4 h
Battery Life
3–5 years
Battery Charger Power
30 W (rated)
Input Voltage Limits
110–285V (half load), 180–285V (full load)
Network Frequency
40–70 Hz auto sensing
Maximum Configurable Power
1000 VA / 900 W
Output Frequency
50/60 Hz ± 3 Hz (sync to mains)
Harmonic Distortion
3%
UPS Type
Double conversion online
Wave Type
Sine wave
Efficiency
88% (full load)
Additional Information
Configurable for 220, 230, or 240V nominal output
Bypass Type
Internal bypass (automatic and manual)
Crest Factor
3:1
This APC Back-UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business. The 1600VA tower UPS has 4 total outlets, all of which provide battery backup and surge protection. The UPS has a surge energy rating of 273 Joules. It features Automatic Voltage Regulation to correct voltage dips and surges to proper levels.
Specifications
Model:
BX1600MI-MS
Power Capacity:
1600VA / 900 Watts
Topology:
Line-Interactive
Waveform Type:
Stepped approximation to a sinewave
Output Voltage:
230V
Output Connections:
4 Universal outlets (Battery Backup)
Input Frequency:
50/60Hz +/- 0.5Hz
Runtime at ½ Load:
6.5 minutes
Runtime at Full Load:
1 minute
Transfer Time:
6 ms typical, 10 ms maximum
Battery Type:
Maintenance-free sealed Lead-Acid
Battery Recharge Time:
8 hours
Data Line Protection:
RJ45 Gigabit
Software:
PowerChute Personal Edition
Surge Energy Protection:
273 Joules
Pure sine wave ouptut provides cleanest signal for active PFC servers and electronics
AVR corrects voltage variations to provide reliable power
Reactor circle visually alerts of remaining power, surges, dips, power outages, and building wiring faults
3 USB smart charging ports (Type A + C) to plug in your wireless gaming devices and mobile phone
Rear LEDs illuminate outlets so you see exactly where you're plugging in your gaming gear
General specifications
Model:
BGM2200-MSX
Output Capacity:
2200VA / 1320W
UPS Type:
Line-interactive
Wave Type:
Pure sine wave
Input Voltage:
230 V AC 1 phase
Output Voltage:
230 V 1 phase
Features
Outlets:
6 total (3 universal and 3 IEC C13), with 4 providing battery backup and surge protection, and 2 providing surge protection only
Surge Protection:
1080 Joules
RGB Lighting:
Yes
Automatic Voltage Regulation (AVR):
Corrects for voltage fluctuations without using the battery
Input Connection:
C19/C21
Performance and battery
Output Frequency:
50/60 Hz +/- 3 Hz, synced to mains
Battery Type:
User-replaceable lead-acid battery
Battery Recharge Time:
Approximately 16 hours
Full Load Runtime:
Approximately 30 minutes (based on 1320W load)
Estimated Runtime:
A connected gaming PC will have a shorter runtime; a high-power gaming PC will have only a few minutes, while lower-power devices like a router could get 30-45+ minutes
