Specifications
Model:
APC Back-UPS BX750MI-MS
Power Capacity:
750VA / 410 Watts
Input/Output Voltage:
230V
Topology:
Line-Interactive
Waveform:
Stepped approximation to a sinewave
Output Connections:
2 x Universal Sockets (Battery Backup)
1 x IEC 60320 C13 (Battery Backup)
Automatic Voltage Regulation (AVR):
Yes
Features and Benefits
Battery Backup:
Provides power to essential equipment during power outages.
Surge Protection:
Protects devices from damaging power surges and spikes.
Universal Sockets:
Accommodates various device plugs.
Line-Interactive Design:
Offers efficient power management.
AVR:
Automatically regulates voltage without switching to battery for minor fluctuations.
Specifications:
Model:
BX950MI-MS
Capacity:
950 VA
Rated Power:
520 W (480 W load)
Input Voltage:
230 V
Output Voltage:
230 V
UPS Type:
Line-interactive
Waveform:
Stepped approximation to a sine wave
Transfer Time:
6 ms typical
Outlets:
2 Universal outlets and 2 IEC (C13) outlets
Features:
Automatic Voltage Regulation (AVR)
Battery-protected and surge-protected outlets
Surge-only protection for non-critical equipment
Automatic battery self-test
Status LED for On Line and On Battery modes
Distinct low-battery alarm
RJ45 10/100/1000 Base-T Ethernet data line protection
General specifications
Model:
BGM2200-MSX
Output Capacity:
2200VA / 1320W
UPS Type:
Line-interactive
Wave Type:
Pure sine wave
Input Voltage:
230 V AC 1 phase
Output Voltage:
230 V 1 phase
Features
Outlets:
6 total (3 universal and 3 IEC C13), with 4 providing battery backup and surge protection, and 2 providing surge protection only
Surge Protection:
1080 Joules
RGB Lighting:
Yes
Automatic Voltage Regulation (AVR):
Corrects for voltage fluctuations without using the battery
Input Connection:
C19/C21
Performance and battery
Output Frequency:
50/60 Hz +/- 3 Hz, synced to mains
Battery Type:
User-replaceable lead-acid battery
Battery Recharge Time:
Approximately 16 hours
Full Load Runtime:
Approximately 30 minutes (based on 1320W load)
Estimated Runtime:
A connected gaming PC will have a shorter runtime; a high-power gaming PC will have only a few minutes, while lower-power devices like a router could get 30-45+ minutes
Specifications
Power Capacity:
800VA / 450 Watts
Voltage:
230V nominal input and output
Output Connections:
4 Universal Receptacles (all battery backup)
Topology:
Line Interactive
Waveform Type:
Stepped approximation to a sinewave
Transfer Time:
6ms typical, 10ms maximum
Input Connection:
IEC-320 C14
Battery:
Maintenance-free sealed Lead-Acid
Features & Management
Automatic Voltage Regulation (AVR):
Corrects for voltage fluctuations without switching to battery power.
Universal Outlets:
Standardized connections for various plug types.
Control Panel:
LED Status display for power conditions (On Line, On Battery).
Audible Alarms:
Provides alerts for low battery, overload, and being on battery.
Specifications
Power Capacity:
1200VA / 650 Watts
Voltage:
230V (Nominal Input & Output)
Topology:
Line-Interactive
Output Connections:
1 x IEC 320 C13 (Battery Backup)
4 x Universal (Battery Backup)
Waveform Type:
Stepped approximation to a sinewave
Transfer Time:
6 ms typical / 10 ms maximum
Runtime:
5 minutes at 50% load
Features
Automatic Voltage Regulation (AVR):
Corrects voltage fluctuations without draining the battery.
Computer Grade Surge Protection:
Protects against damaging power surges and spikes.
Quick Mute:
Allows for silencing of audible alarms during a power event.
LED Indicators:
Provides easy visual confirmation of the UPS's functional status.
Design:
Slim and modern, can be placed upright, flat, or wall-mounted.
Additional Information
Input Connection:
IEC 60320 C14
Cord Length:
1.2 meters
Battery:
Maintenance-free sealed Lead-Acid battery
Regulatory Approvals:
CE, CB, EN/IEC 62040-1, EN/IEC 62040-2.
SPECIFICATION
UPS Model
BVX650I-PH
Power Capacity
360 W / 650 VA
Nominal Output Voltage
230 VAC +/- 10%
Topology
Line Interactive
Transfer Time
4-6ms typical, 10ms max
Output Connections
(4) NEMA 5-15R Battery Backup Outlets
Nominal Input Voltage
230 VAC
Input Voltage Range
140 - 300 VAC
Frequency
50 Hz / 60 Hz ± 5Hz
Input Circuit Breaker
5A
Cord Length
1.2 (m)
AC Power Surge Protection
All Outlets
LED Indicators
LED Status display with online : on battery
Alarms
on battery : low battery : overload continuous tone alarm
Battery Type
Maintenance-free, sealed lead-acid battery, leak proof
Dimensions (H x W x D)
14.2 cm x 10.1 cm x 30 cm
Audible Noise at 1m from Unit
40 dBA max
Specifications
Main Input Voltage
230 V AC 1 phase
Main Output Voltage
230 V AC 1 phase
Rated power in W
480 W
Rated power in VA
900 VA
Product or component type
Uninterruptible power supply (UPS)
Input Connection Type
IEC 60320 C14
output connection type
2 universal1 IEC 60320 C13
Cable length
1.2 m
Number of cables
1
Battery type
Lead-acid battery
Provided equipment
User manual
Batteries & Runtime
Number of battery filled slots
0
Number of battery free slots
0
Battery recharge time
8 h
Battery voltage
12 V
Battery capacity
9.0 Ah
Battery life
2…3 year(s)
Extended runtime
0
General
Max runtime
120 min
Number of power module free slots
0
Number of power module filled slots
0
Redundant
No
UPS size
WS
Physical
Colour
Black
Height
16 cm
Width
12 cm
Depth
35.5 cm
Net weight
6 kg
Mounting support
Floor
Mounting preference
No preference
Mounting mode
Not rack-mountable
Two post mountable
0
USB compatible
No
Input
Network frequency
50/60 Hz +/- 5 Hz auto-sensing
Input voltage limits
140...300 V 230 V AC
Cos phi
0.53
Output
Maximum configurable power in W
480 W
Output frequency
50/60 Hz +/- 1 Hz sync to mains
UPS type
Line interactive
Wave type
Stepped approximation to a sinewave
Full load runtime
00:01:00 480 W
Graph display
1
Half load runtime
00:06:30 240 W
Maximum configurable power in VA
900 VA
Transfer time
6 ms typical : 10 ms maximum
Conformance
Product certifications
CE
Standards
EN/IEC 62040-1:2019/A11:2021EN/IEC 62040-2:2006/AC:2006EN/IEC 62040-2:2018
Equipment protection policy
Lifetime : 50000 euros
Environmental
Ambient air temperature for operation
0…40 °C
Relative humidity
0…95 % non-condensing
Operating altitude
0...3000 m
Ambient air temperature for storage
-15…40 °C
Storage Relative Humidity
0…95 % non-condensing
Storage altitude
0…3000 m
Acoustic level
40 dBA
IP degree of protection
IP20
Surge Protection and Filtering
Surge energy rate
273 J
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
25 cm
Package 1 Width
43 cm
Package 1 Length
19.7 cm
Package 1 Weight
6.5 kg
SCC14
10731304404368
Power and electrical specifications
Power Rating:
1200VA / 650 Watts
Topology:
Line-interactive
Waveform:
Stepped approximation to a sinewave
Output Voltage:
230V
Input Voltage:
230V
Input Frequency:
50/60 Hz +/- 5 Hz auto-sensing
Output Frequency:
50/60 Hz +/- 1 Hz sync to mains
Transfer Time:
6 ms typical / 10 ms maximum
Surge Energy Rating:
273 Joules
Connections and runtime
Output Connections:
4 universal sockets (battery backup + surge) and 1 IEC C13 (battery backup)
Input Connection:
IEC C14
Power Cord:
1.2 meters
Full Load Runtime:
Approximately 1 minute at 650W
Other features
Automatic Voltage Regulation (AVR):
Corrects voltage fluctuations without using the battery
Battery:
Lead-acid, typical recharge time of 8 hours, expected life of 1-2 years
Warranty:
2-year manufacturer warranty
Specifications:
Power Capacity:
2200VA / 1200 Watts
Topology:
Line-Interactive
Output Voltage:
230V (On Battery: 230V +/- 10% at 100% load)
Waveform:
Stepped approximation to a sinewave
Output Connections:
4 Universal outlets for battery backup
Automatic Voltage Regulation (AVR):
Corrects voltage fluctuations by increasing or decreasing output voltage without using the battery, conserving its power.
Data Line Protection:
Includes RJ45 Gigabit ports for network surge protection
Runtime:
Typical Backup Time (½ Load):
8.5 minutes
Typical Backup Time (Full Load):
1 minute
Batteries:
Type:
Maintenance-free, sealed Lead-Acid
Recharge Time:
Approximately 8 hours for a typical recharge
Management:
Features intelligent battery management, with a periodic self-test to detect failing batteries and provide early warnings for replacement.
Specifications
Model:
BV650I-MS
Type:
Line-Interactive UPS
Power Capacity:
650VA / 375 Watts
Waveform Type:
Stepped approximation to a sinewave (Simulated Sine Wave)
Topology:
Line-Interactive
Output Connections:
Universal Outlets (4)
Protection Features
Automatic Voltage Regulation (AVR):
Surge Protection:
Offers protection against power surges.
EMI/RFI Filtering:
Filters out electrical noise.
Battery and Performance
Battery Type:
Maintenance-free sealed Lead-Acid battery
Battery Backup Time:
Up to 10 minutes at half load (variable).
Transfer Time:
6ms typical
User Interface
Control Panel:
LED Status display with On Line and On Battery indicators.
Alarms:
Audio and visual alarms for power failures, low battery, and overload.
Physical Characteristics
Dimensions:
330 x 140 x 100 mm (WxDxH)
Weight:
3.5 kg
Input Connection:
IEC-320 C14
Common specifications
UPS Type:
Double-conversion online
Output:
Pure sine wave
Input Voltage:
230V (configurable to 220V or 240V)
Input Frequency:
40-70 Hz auto-sensing
Output Frequency:
50/60 Hz +/- 3 Hz sync to mains
Efficiency:
Up to 88% at full load; 98% in eco mode
Power Factor:
High power factor
Bypass:
Automatic internal bypass
Design:
Rack/tower convertible
Management:
LCD status and control console, intelligent card slot for optional management cards
Model-specific specifications
Model
Power Output (Watts)
Power Output (VA)
Output Connections
SRV1KI-E
900W
1000VA
3x IEC C13
SRV2KIL-E
1800W
2000VA
4x IEC C13
SRV3KIL-E
2700W
3000VA
6x IEC C13 + 1x IEC C19
