| CPU |
|
| Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel®
|
Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1200 package |
| L3 cache varies with CPU |
| (Please refer "CPU Support List" for more information.) |
| Chipset |
|
| Intel® H470 Express Chipset |
| Memory |
|
| Intel® Core™ i9/i7 processors: |
| Support for DDR4 2933/2666/2400/2133 MHz memory modules |
| Intel® Core™ i5/i3/Pentium®/Celeron®processors: |
| Support for DDR4 2666/2400/2133 MHz memory modules |
| 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
| Dual channel memory architecture |
| Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
| Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| Support for Extreme Memory Profile (XMP) memory modules |
| (Please refer "Memory Support List" for more information.) |
| Onboard Graphics |
| Integrated Graphics Processor-Intel® HD Graphics support: |
| 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz |
| * D-Sub port, supported by 10th Generation processors only. |
| 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz |
| * The DVI-D port does not support D-Sub connection by adapter. |
| 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz |
| * Support for HDMI 1.4 version and HDCP 2.3. |
| 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz |
| * Support for DisplayPort 1.4 version, HDCP 2.3, and HDR. |
| Support for up to 3 displays at the same time |
| Maximum shared memory of 512 MB |
| Audio |
|
| Realtek® ALC887 codec |
| High Definition Audio |
| 2/4/5.1/7.1-channel |
|
To configure 7.1-channel audio, you need to open the audio software and
|
select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software. |
| LAN |
|
| Intel® GbE LAN chip (1000 Mbit/100 Mbit) |
| Expansion Slots |
| 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| 1 x PCI Express x16 slot, running at x4 (PCIEX4) |
| 2 x PCI Express x1 slots |
| (All of the PCI Express slots conform to PCI Express 3.0 standard.) |
| Supports up to ASPM L1.2 power management protocols. |
| Multi-Graphics Technology |
| Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
| Storage Interface |
| 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/x2 SSD support) (M2Q) |
| 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD support) (M2P) |
| 6 x SATA 6Gb/s connectors |
| Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
| * Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors. |
| Intel® Optane™ Memory Ready |
| M.2 connectors support up to ASPM L1.2 PCIe power management protocols. |
| USB |
|
| Chipset: |
|
| 1 x USB Type-C™ port on the back panel, with USB 3.2 Gen 1 support |
| 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header) |
| 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) |
| Internal I/O Connectors |
| 1 x 24-pin ATX main power connector |
| 1 x 8-pin ATX 12V power connector |
| 1 x CPU fan header |
| 3 x system fan headers |
| 1 x addressable LED strip header |
| 1 x RGB LED strip header |
| 2 x M.2 Socket 3 connectors |
| 6 x SATA 6Gb/s connectors |
| 1 x front panel header |
| 1 x front panel audio header |
| 1 x USB 3.2 Gen 1 header |
| 2 x USB 2.0/1.1 headers |
| 2 x Thunderbolt™ add-in card connectors |
| 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
| 1 x serial port header |
| 1 x parallel port header |
| 1 x Clear CMOS jumper |
| 1 x Q-Flash Plus button |
| Back Panel Connectors |
| 1 x PS/2 keyboard/mouse port |
| 1 x D-Sub port |
| 1 x DVI-D port |
| 1 x HDMI port |
| 1 x DisplayPort |
| 1 x USB Type-C™ port, with USB 3.2 Gen 1 support |
| 3 x USB 3.2 Gen 1 ports |
| 2 x USB 2.0/1.1 ports |
| 1 x RJ-45 port |
| 3 x audio jacks |
| I/O Controller |
| iTE® I/O Controller Chip |
| H/W Monitoring |
| Voltage detection |
| Temperature detection |
| Fan speed detection |
| Overheating warning |
| Fan fail warning |
| Fan speed control |
| * Whether the fan speed control function is supported will depend on the cooler you install. |
| BIOS |
|
| 1 x 256 Mbit flash |
| Use of licensed AMI UEFI BIOS |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Unique Features |
| Support for APP Center |
| * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
| @BIOS |
|
| EasyTune |
|
| Fast Boot |
|
| Game Boost |
| ON/OFF Charge |
| RGB Fusion |
| Smart Backup |
| System Information Viewer |
| Support for Q-Flash Plus |
| Support for Q-Flash |
| Support for Xpress Install |
| Bundled Software |
| Norton® Internet Security (OEM version) |
| cFosSpeed |
| Operating System |
| Support for Windows 10 64-bit |
| Form Factor |
| Micro ATX Form Factor; 24.4cm x 24.4cm |
