ValueRAM's KVR32S22D8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22 22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features:
Power Supply:
VDD = 1.2V Typical
VDDQ =
1.2V Typical
VPP =
2.5V Typical
VDDSPD =
2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB:
Height 1.18” (30.00mm)
RoHS Compliant and Halogen-Free
This document describes KVR32N22S8/8, a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to the JEDEC-standard DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers
Specifications:
Power Supply
VDD = 1.2V Typical
VDDQ
1.2V Typical
VPP
2.5V Typical
VDDSPD
2.2V to 3.6V
On-Die Termination
Nominal and dynamic ODT for data, strobe, and mask signals
LPASR
Low-power auto self refresh
DBI
Data bus inversion for data bus
VREFDQ
On-die generation and calibration
Rank
Single-rank
SPD EEPROM
On-board I2 serial presence-detect
Internal Banks
16 banks; 4 groups of 4 each
Burst
Fixed BC4 and BL8 via MRS
OTF
Selectable BC4 or BL8 on-the-fly
Topology
Fly-by
Bus
Terminated control command and address bus
PCB Height
1.23” (31.25mm)
Compliance
RoHS Compliant and Halogen-Free
Kingston KVR56S46BS8-16 16GB DDR5 5600MHz NON-ECC SODIMM Memory
This document describes ValueRAM's KVR56S46BS8-16 is a 2G x 64-bit (16GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR5-5600 timing of 46-45-45 at 1.1V. Each 262-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Feature
Description
Power Supply
VDD = 1.1V Typical
VDDQ
1.1V Typical
VPP
1.8V Typical
VDDSPD
1.8V to 2.0V
On-Die ECC
Yes
PCB Height
1.18” (30.00mm)
Compliance
RoHS Compliant and Halogen-Free
BASIC DDR4 U-DIMM MEMORY
Original chips improve the performance of computer
Selected original chips, strict inspection process, 8-layer PCB board, stable performance
FEATURE
Excellent compatibility
Memory products have passed the motherboard compatibility test of mainstream brands on the market, ensuring the stability of the system for a long time
Gold-plated craft gold finger
Gold plating process, stronger conductivity and corrosion resistance
SPECIFICATIONS
Manufacturer Code:
NTBSD4P32SP-16
Manufacturer:
NETAC
Capacity:
8GB/ 16 GB
Internal memory type:
DDR4
Memory clock speed:
3200 MHz
Component for:
Notebook
Memory voltage
1.35 V
Module type:
DIMM
Pin Configuration:
288-Pin
Backlight:
No
