Specification (Last stocks - Phase out)
Standards
IEEE 802.11a/b/g, IEEE802.11n Draft
Security
Security features: WEP, WPA, and WPA2Security key bits: Up to 256-bit encryption
WPA/WPA2
WPA2
Interface
USB 2.0
Frequency Band
2.4GHz/5GHz
LEDs
Link/Act
Transmitted Power
Transmitted Power:2.4GHz Wireless-N @ <16 dBm (Typical)5GHz Wireless-N @ <16 dBm (Typical)Receive Sensitivity:2.4GHz Wireless-N @ <-91dBm (Typical)5GHz Wireless-N @ <-91dBm (Typical)Antenna Gain in dBi:2.4GHz Wireless @ ± (Typical): 2dB +/-1dB5GHz Wireless @ ± (Typical): 4dB +/- 1dB
Antenna
2 Internal Antennas
System Requirements
600 MHz or faster PC512 MB of RAM MemoryCD-ROM driveAvailable USB port (USB2.0 port required for fastest speeds)Up-to-date Windows 2000, XP, or Vista
Dimensions
3.9" x 1.1" x 0.4"
Weight
0.79 oz
Temperature
0°C - 40°C (32°F - 104°F)
Humidity
10% - 85%, Non-Condensing
Feature
Features
MIMO technology uses multiple radios to create a robust signal that travels farther and reduces dead spotsPerformance Investment Protection: Compatibility with Wireless-B (802.11b) and Wireless-G (802.11g) StandardsEasy to use Setup Wizard
CBS350-24T-4X Specification
CBS350-24T-4X Specification
Feature
Description
Capacity in Millions of Packets per Second (mpps) (64-byte packets)
95.23
Switching Capacity in Gigabits per Second (Gbps)
128.0
Total System Ports
24 x Gigabit Ethernet + 4 x 10G
RJ-45 Ports
24 x Gigabit Ethernet
Combo Ports (RJ45 + Small form-factor pluggable [SFP])
4 x SFP+
Packet Buffer
1.5 MB
Unit dimensions (W x D x H)
445 x 240 x 44 mm (17.5 x 9.45 x 1.73 in)
Layer 3
IPv4 routing
Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing
Wirespeed routing of IPv6 packets
Layer 3 Interface
Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR)
Support for classless interdomain routing
RIP v2
Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR)
Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server
Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3
Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay
Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Quality of Service
Priority levels
8 hardware queues
Scheduling
Strict priority and Weighted Round-Robin (WRR)
Rate limiting
Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing
Congestion avoidance
A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization
iSCSI traffic optimization
A mechanism for giving priority to iSCSI traffic over other types of traffic
Green (power efficiency)
Energy Detect
Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up
Cable length detection
Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables.
EEE Compliant (802.3az)
Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs
LEDs can be manually turned off to save on energy
Time-based port operation
Link up or down based on user-defined schedule (when the port is administratively up)
Time-based PoE
PoE power can be on or off based on user-defined schedule to save energy
General
Jumbo frames
Frame sizes up to 9K bytes. The default MTU is 2K bytes
MAC table
16K addresses
Hardware
USB slot
USB Type-A slot on the front panel of the switch for easy file and image management
Buttons
Reset button
Cabling type
Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs
System, Link/Act, PoE, Speed
Flash
256 MB
CPU
800 MHz ARM
DRAM
512 MB
Environmental
Storage temperature
-13° to 158°F (-25° to 70°C)
Operating humidity
10% to 90%, relative, noncondensing
Storage humidity
10% to 90%, relative, noncondensing
Warranty
Limited lifetime with next business day advance replacement (where available)
Package Contents
● Cisco Business 350 Series Managed Switch
● Power Cord (Power adapter for select 8-port and 16-port SKUs)
● Mounting Kit
● Quick Start Guide
Minimum Requirements
● Web browser: Chrome, Firefox, Edge, Safari
● Category 5e Ethernet network cable
● TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed
Warranty Limited Lifetime
SPECIFICATIONStandards and Protocols: 802.3 10BASE-T Ethernet 802.3u 100BASE-TX Fast Ethernet 802.3ab 1000BASE-T Gigabit Ethernet 802.3z Gigabit Ethernet 802.3x flow Control 802.1p Priority 802.3az, Energy Efficient Ethernet.Ports: 24 RJ-45 connectors for 10BASE-T / 100BASE-TX.LED Indicators: System / PWR, Link / Activity, 100M, * Gigabit, *.Power: 00-240VAC, 50-60 Hz, internal, universal.Dimensions : (W * D * H). 11 x 1.75 x 6.7 inches (279.4 x 44.5 x 170 mm).Operating Temperature: 32 ° to 104 ° F (0 ° to 40 ° C).Storage Temperature: -4 ° to 158 ° F (-20 ° to 70 ° C).Operating Humidity: 10% to 90%, relative, non-condensing.Storage Humidity: 10% to 90%, relative, non-condensing.Certifications: UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) (CFR 47) Class A.Brand: CISCO_____________________________________________________Warranty Information:• Item compatibility is buyer’s responsibility.• For security purposes: Kindly secure unboxing video incase wrong item and defective upon received.• Check all items upon receipt.• All items/claims for warranty are carry-in.• Tampered warranty sticker voids the warranty.• Overclocking may void the warranty.• Items for warranty must be complete with original contents/packaging and accompanied by warranty receipt.• Defective items for warranty are subject for pull out and RMA services. (Shipping fee should be shoulder by customer)