KEY FEATURE ATX 3.0 and PCIe Gen 5.0 ready (compatible with ATX 3.1) 80 PLUS Platinum certified 100% Japanese capacitors 120mm smart Fluid Dynamic Bearing (FDB) fan Compact design Fully modular design Powerful single +12V rail OVP/OPP/SCP/UVP/OCP/OTP protection The AE1000PM PG5 ICE can sustain power excursions of up to 3 times the GPU power and 2 times the total power. It's fully compliant with the Intel ATX 3.0 standard, supporting up to 200% power excursions and achieving 70% efficiency at low loads. Additionally, the included high-quality, native 16-pin cable ensures compatibility with PCIe Gen 5.0 graphics cards, delivering up to 600 watts of power. AORUS magnetic plate design The unique AORUS magnetic plate can be attached to different sides of the power supply based on the user’s preference, presenting the best visual effect from any angle. Additionally, while the plate being moved on the case, its neon color printing with metallic sheen creates solid and hollow special effects for the AORUS logo. 80 PLUS Platinum certified 80 Plus Platinum certified ensures to deliver 92% efficiency at 50% load. The better power efficiency leads to less power waste, less heat and less fan noise. 100% Japanese capacitors All capacitors are high quality Japanese capacitors, to produce the efficient performance and to ensure the longer reliability. 120mm smart Fluid Dynamic Bearing (FDB) fan High-performance Fluid Dynamic Bearing fan uses oil film shock absorption technology to effectively reduce noise, making it quieter than conventional sleeve fan and providing more than twice the lifespan. In addition, the fan speed is adjusted according to the automatic power detection and stops when the system is idle or under low load (less than 50% load). Compact design GIGABYTE's engineering expertise in heat dissipation and material selection has shrunk the length of the power supply to an impressive 140 mm, ensuring compatibility with even space-constrained chassis. Fully modular design All the flat cables are modular design. Installing only the cables you need to reduce clutter, to increase the airflow and to improve the chassis thermal performance. SPECIFICATIONS: Model: GP-AE1000PM PG5 ICE Type:    Intel Form Factor ATX 12V v3.0 (compatible with ATX 3.1) PFC: Active PFC (>0.9 typical) Input Voltage: 100-240 Vac (full range) Input Current: 15-6.5A Input Frequency: 60-50 Hz Output Capacity: 1000W Dimension: 150 x 140 x 86mm Fan Type: 120mm Fluid Dynamic Bearing (FDB) Fan 80 PLUS: Platinum Efficiency: 92% at typical load MTBF: >100,000 hours Protection: OVP/OPP/SCP/UVP/OCP/OTP Power Good Signal: 100-150ms Hold Up Time: >16ms Cable Type: Flat, All white Connectors: ATX/MB 20+4 Pin x 1 : 650mm*1 CPU/EPS 4+4 Pin x 2 : 700mm*2 PCI-e 16 Pin x 1: 700mm*1 PCI-e 6+2 Pin x 6: 650mm+150mm*2, 750mm*2 SATA x 8: 600mm+150mm+150mm+150mm*2 4 Pin Peripheral x 4 : 500mm+150mm+150mm+150mm*1

Read more less

Level up your gaming experience Built with a high-quality controller and 3D TLC NAND flash, AORUS Gen4 5000E SSD delivers up to 5,000MB/s sequential read and 3,800MB/s sequential write performance. By utilizing Host Memory Buffer technology, the SSD controller can access the host DRAM without performance loss. As for features, AORUS Gen4 5000E SSD supports TRIM, SMART, and Over-Provision technologies to improve the reliability and durability of SSDs. AORUS Gen4 5000E SSD allows users to enjoy a smoother and faster gaming experience with more power efficiency. Key Features: Form Factor:  M.2 2280 Interface:  PCI-Express 4.0 x4, NVMe 1.4 Total Capacity:  500GB* Sequential Read Speed: up to 5,000MB/s** Sequential Write speed: up to 3,800MB/s** HMB (Host Memory Buffer) supported TRIM & S.M.A.R.T supported Energy-efficient   Product Specifications: Interface: PCI-Express 4.0x4, NVMe 1.4 Form Factor: M.2 2280 Total Capacity: 500GB NAND: 3D TLC NAND Flash Sequential Read speed: Up to 5,000 MB/s Sequential Write speed: Up to 3,800 MB/s Dimension: 80 x 22 x 2.3 mm Mean time between failure (MTBF): 1.5 million hours Power Consumption (Active): Average: R: 4W / W: 4W Power Consumption (Idle) (ASPT on): 20mW Temperature (Operating): 0°C to 70°C Temperature (Storage): -40°C to 85°C

Read more less

AORUS Gen4 7300 SSD 1TB Key Feature Form Factor: M.2 2280 Interface: PCI-Express 4.0 x4, NVMe 1.4 Total Capacity: 1000GB* Sequential Read Speed : up to 7300 MB/s** Sequential Write speed : up to 6000 MB/s** Wear Leveling, Over-Provision technologies TRIM & S.M.A.R.T supported AES-256 Supported High Efficient Heat Spreader with Nanocarbon Coating Extremely fast PCIe 4.0 throughput AORUS Gen4 7300 SSD delivers sequential read up to 7.3GB/s with 8 Channel controller- Phison E18- and 3D TLC NAND. The E18 controller is built with the advanced 12nm process ensuring sufficient computing power. Also it supports up to 8 NAND Flash channel with 32CE, DDR4 SLC caching and meets NVMe 1.4. * Performance may vary based on system hardware & configuration.** Test system configuration: AM5 X670(AMD Ryzen 9) + PCIe 4.0x4, NVMe 1.4 Interface + DDR4 DRAM cache + 8 CH with 32 CEs + Supports SMART an NAND Flash Selected for High Quality and Performance Selected High Speed 3D TLC NAND Flash (1600+ MT/s) The ultra high speed 3D TLC NAND Flash is operating at 1600+ MT/s, which is 50% more than the prevision version that leads to better performance. 2X 1600+ MT/s NAND Flash Speed (MT/s)   Xtreme Storage Performance By adopting Phison E18 controller and 3D TLC NAND, AORUS Gen4 7300 SSD delivers blazing speeds: up to 7,300 MB/s for sequential read, and up to 6,000MB/s sequential write. Sequential Read performance of PCIe 4.0 SSDs is 2 times faster than the PCIe 3.0 SSDs. Get ready to enter the next generation of computing with faster and smoother, gaming, streaming, and graphics intensive rendering. Optimized Aluminum Heat Spreaders with Nanocarbon Coating for 20% Cooler Challenged passive cooling to maximize surface area for heat dissipation with advanced thermal technology Nanocarbon coating. Applied with dual side high conductivity thermal pad ensures the heat transferring to the heatsink. The 7mm height heatsink is compatible with all the M.2 slots including the one under graphic card. Efficient Heat Spreader Design Compared with regular heat spreader, the new high efficient heat spreader improves thermal dissipation to extend 46% more time running at high speed. In addition, compared to the one without heatsink, AORUS Gen4 7300 SSD running 5 times longer at 7.3GB/s. Enjoy the smoother & upgraded storage performance.    Why is keeping an SSDs at lower temperatures so important? Higher working temperature may cause data loss. The degradation factor of data loss could be a hundred times higher. With Heat Spreaders, the AORUS Gen4 7300 SSD can operate at lower working temperatures to improve data storage reliability. Furthermore, SSDs can running at extreme performance longer. AORUS Gen4 7300 SSD meets SSD expansion requirements of PS5 AORUS Gen4 7300 SSD with Aluminum Heat Spreaders meets the required performance and dimensions of PS5 M.2 SSD.Adopting by Aluminum Heat Spreaders with Nanocarbon Coating, AORUS Gen4 7300 SSD improves thermal dissipation and helps to prevent throttling. AORUS Gen4 7300 SSD is fully reach ps5 requirement and give the best gaming experience.Looking for the best partner for your PS5? Enjoy the thrilling gaming experience by applied AORUS Gen4 7300 SSD to your PS5 to expand more capacities. GIGABYTE CONTROL CENTER (GCC)   GIGABYTE CONTROL CENTER (GCC) is a unified software for all GIGABYTE supported products. It provides newly designed intuitive user interface to control all essential function. Unified software platform for all Gigabyte supported products Intuitive user interface for an eased experience Modularized control components only for installed hardware Auto update function to keep system up to date and support future products. Specification Interface PCI-Express 4.0 x4, NVMe 1.4 Form Factor M.2 2280 Total Capacity 1000GB NAND 3D TLC NAND Flash External DDR Cache DDR4 1GB Sequential Read speed Up to 7300 MB/s Sequential Write speed Up to 6000 MB/s Dimension SSD without Heatsink: 80 x 22 x 2.3 mm (Single Side)SSD with Heatsink: 80.5 x 23.5 x 11.25 mm Mean time between failure (MTBF) 1.6 million hours Max. Operating Power Read: 6.6WWrite: 6.7W Power Consumption (Idle, PS3) 30mW Power Consumption(PS4, L1.2) 3mW Temperature (Operating) 0°C to 70°C Temperature (Storage) -40°C to 85°C Warranty 1. Limited 5-years or 700TBW. 2. Limited warranty based on 5 years or 700TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail. 3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) in SMART page of "GIGABYTE SSD toolbox" reaches 100 means out of warranty. (A new unused product will show the number of 0) Note • Test system configuration: configuration may vary by models, we will choose the latest platform for verification. • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0. • Speeds based on internal testing. Actual performance may vary. • 1GB = 1 billion bytes. Actual useable capacity may vary. Test Configuration OS: Windows 11 22H2 (OS build 22621.819)CPU: AMD Ryzen 9 7950X 16-Core Processor 4.5GMemory: DDR5 5600 16GBx2Chipset: AM5 X670 (X670E AORUS MASTER)

Read more less

AORUS WATERFORCE II 360 Fan EZ-Chain: DIY-friendly fan design with slide-in interlocking mechanism and DAISY-CHAIN. 330-degree Rotatable water block design. New fan blade design increases both airflow and pressure, while reducing noise. The ARGB fan lighting can be synchronized with other devices. Universal design for fan and pump RPM control, compatible with all motherboard brands. Where Effortless Meets Efficiency The upgraded all-in-one liquid cooling system is here, injecting boundless power into your gaming experience and enjoy DIY-friendly Innovation features for easy, neat installations. Support 1851 socket The optimal pound-force design perfectly fits the latest intel Core Ultra (Arrow Lake-S) CPU, providing excellent cooling performance. DIY-friendly Innovations Say goodbye to time wasted on wiring connections Fan EZ-Chain incorporates a slide-in interlocking mechanism along with a DAISY-CHAIN setup, enabling the transmission of power and signals between fans, thereby saving a significant amount of time on wiring connections. Adjustable Design Enjoy the flexibility of a 330-degree manual rotation, allowing you to customize the orientation to your liking. New Fan Blade Design The new fan blade design has achieved a simultaneous increase in both airflow and pressure, along with a reduction in noise. Bring the Light of Victory to the Battlefield Create an exceptional gaming atmosphere with the seamless integration of chrome plating and dynamic LED lighting on the water block, along with the ability to adjust both the ARGB fan lighting and water block lighting together. SPECIFICATIONS Dimensions: 394 x 119 x 27mm Pump Dimension: 72.8 x 72.8 x 65.1mm Radiator Material: Aluminum Block Material: Copper Tube Length: 380mm Tube Material: Rubber Tube with Nylon Sleeve CPU Socket: Intel 115x,1200,1700,1851 AMD AM5, AM4 Pump: Speed: 1600~3400 RPM +/-10% Fan: Spec: 3 x 120mm ARGB Fans Speed: 800~2300 RPM +/-10% Bearing type: HDB Air Flow: 64.95 CFM Air Pressure: 2.93mmH20 Noise Level: 12.8~36.9 dBA

Read more less