General specs
Model:
AD-OUF601-C
Category:
Cat6E
Length:
305 meters (1000 ft)
Application:
High-performance data transfer for outdoor installations, telecommunications, CCTV, computer networking, and POE power supply
Conductor and material specs
Conductor material:
Copper Clad Aluminum (CCA)
Conductor thickness:
0.5mm
Conductor size:
24AWG or 23AWG
Conductor structure:
Solid
Number of conductors:
4 Pairs (8 total)
Insulator material:
HDPE
Insulation thickness:
0.18mm
Performance and physical specs
Shielding:
FTP (Foil Twisted Pair) with unshielded twisted pairs
Filler:
PE CROSS
Jacket material:
PVC+HDPE
Jacket thickness:
0.65mm (±0.02mm)
Stretching resistance:
(max) 400N
Impedance:
100±15%Ω100 plus or minus 15 % cap omega
100±15%Ω
at 1~250MHz
Transmission velocity:
66%
Working capacitance:
5.4nf/100m
Insulation resistance:
10000MΩ⋅km10000 cap M cap omega center dot k m
10000𝑀Ω⋅𝑘𝑚
Operating temperature:
-40 ∘Cnegative 40 space raised to the composed with power cap C
−40 ∘𝐶
to
+70 ∘Cpositive 70 space raised to the composed with power cap C
+70 ∘𝐶
5-Port Gigabit Desktop Switch with 4-Port PoE+
5× 10/100/1000 Mbps RJ45 ports
With four PoE+ ports, transfers data and power on one single cable
Works with IEEE 802.3af/at compliant PDs
802.1p/DSCP QoS enable smooth latency-sensitive traffic
Supports PoE Power up to 30 W for each PoE port
Supports PoE Power up to 65 W for all PoE ports*
Up to 250m data and power transmitting range under Extend Mode**
PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
Plug and Play, no configuration and installation required
HARDWARE FEATURES
Interface
• 5× 10/100/1000Mbps RJ45 Ports• AUTO Negotiation• AUTO MDI/MDIX
Network Media
• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)
Fan Quantity
Fanless
External Power Supply
External Power Adapter (Output: 53.5 VDC / 1.31 A)
Packet Forwarding Rate
7.44 Mpps
PoE Ports (RJ45)
• Standard: 802.3 af/at compliant• PoE Ports: Ports 1–4• Power Supply: 65 W
Mac Address Table
2K
Jumbo Frame
16 KB
Switching Capacity
10 Gbps
Dimensions ( W x D x H )
3.9×3.9×1.0 in (99.8×98×25 mm)
Max Power Consumption
• 3.44 W (220/50 Hz. no PD connected)• 74.49 W (220/50 Hz. with 65 W PD connected)
Max Heat Dissipation
• 11.73 BTU/h (no PD connected)• 254.01 BTU/h (with 65 W PD connected)
SOFTWARE FEATURES
Advanced Features
• Compatible With IEEE 802.3af/at Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping• Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)• PoE Auto Recovery (Ports 1-4)
Transfer Method
Store-And-Forward
OTHERS
Certification
FCC, CE, RoHS
Package Contents
• TL-SG1005P• Power Adapter• Installation Guide
Environment
• Operating Temperature: 0–40 ℃ (32–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing
OC200
Omada Hardware Controller
Centralized Management: Up to 100 Omada access points, 20 JetStream switches, and 10 Omada routers.
Free Cloud Access: Manage and monitor with the Omada app or Web UI from anywhere, anytime.
On-Premises Management: Locally monitor and manage devices with the ultimate security and stability.
Industry-Leading Hardware Design: A powerful chipset, durable metal casing, USB 2.0 port for auto backup, and two Fast Ethernet ports.
Flexible Power Supply: 802.3af/at PoE or Micro USB (DC 5V/Minimum 1A) for flexible installation.
Easy and Intelligent Network Monitoring: The easy-to-use dashboard makes it simple to see the real-time network status and traffic distribution.
Real-Time Network Topology: Helps IT admins quickly see and troubleshoot connections at a glance.
Easier Network Maintenance: WiFi heatmap simulator, visualizable network report, and batch & multi-site management benefit network maintenance.
HARDWARE FEATURES
Interface
2 × 10/100Mbps Ethernet Port1 × USB 2.0 Port for configuration backup1 × Micro USB Port for power
Power Supply
802.3af/at PoE or Micro USB（DC 5V/1A）
Dimensions
3.9 × 3.9 × 1.0in.(100 × 98 × 25mm)
MANAGEMENT
Omada App
Yes
Centralized Management
• Up to 100 Omada access points, 20 JetStream switches, and 10 Omada routers• Up to 1,000 ClientsNote: Please refer to www.tp-link.com/en/business-networking/all-omada/ to find all the device models supported by OC200
Cloud Access
Yes
L3 Management
Yes
Multi-site Management
Yes
Management Features
• Automatic Device Discovery• Batch Configuration• Batch Firmware Upgrading• Intelligent Network Monitoring• Abnormal Event Warnings• Unified Configuration• Reboot Schedule• Captive Portal Configuration
OTHERS
Certification
CE, FCC, RoHS
Package Contents
• Omada Hardware Controller OC200• Quick Installation Guide• Ethernet Cable
System Requirements
Microsoft® Windows®10, 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux
Environment
• Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing
2.4GHz up to 300Mbps• LTE Downlink: Up to 150Mbps• LTE Uplink: Up to 50Mbps• 3 x 10/100Mbps LAN, 1 x 10/100Mbps WAN/LAN• 2 x 3G/4G Antennas• 2 x WI-FI Antennas• Support WPA3 Wireless security• Support TR069 management*• Supports WAN Failover (3G/4G &, Wired broadband connection)• In-built VPN Client for secure connection
Specifications:
Frequency Support
• FDD LTE: B1/3/5/7/8/20/28
• TDD 38,40,41
• WCDMA:B1/5/8
Device Interfaces
• 1x 10/100 Fast Ethernet WAN port
• 3x 10/100 Fast Ethernet LAN ports
• 1x Reset button
• 1 x WPS button
• 1 x Power jack Power jack
• 1 x Power switch
• 2 x 5dBi external LTE antennas
• 2 x 5dBi external 2.4G antennas
• 1 x Power switch
• 1x LTE Interface
• 1x Nano SIM card Slot
Data Rates
• 2.4GHz up to 300Mbps
Standards
• 802.11b/g/n
Wi-Fi Data Rates
• HT20: up to 144 Mbps
• HT40: up to 300 Mbps
Wireless Encryption
• Wi-Fi Protected Setup (WPS)
• WPA/WPA2/WPA3 wireless encryption
• 64/128-bit WEP (Wired Equivalent Privacy)
• Wireless ACL MAC address filtering
Firewall
• Network Address Translation (NAT)
• Stateful Packet Inspection (SPI)
Advanced Features
• WAN fail over
• Port forwarding
• IPsec VPN pass through
• QoS Flow Control
• TR-069 remote management
• DMZ
• IGMP proxy and MLD for IPTV
• DHCP server, DHCP client
• URL, IP,MAC filter
• Virtual server
• DDNS
• IPv6
• Denial of Service (DoS) protection
• Embedded AP with 4 SSIDs
• Router, AP, Wireless client, WISP, Repeater mode
Dimensions
• 222x 147x 42 mm (Wx D x H)
Weight
• 240 g
Power
• Input: 100 ~ 240 V
• Output: 12 V / 1A
Temperature
• Operating: -10°C to 40°C
• Storage: -40°C to 70 °C
Humidity
• Operating: 10% to 95% non-condensing
• Storage: 10% to 95% non-condensing
Certifications
• ROHS
• CE
Wireless specifications
Wi-Fi Standard:
Wi-Fi 5 (802.11ac)
Speed:
Up to 1200 Mbps (300 Mbps on 2.4GHz + 867 Mbps on 5GHz)
Bands:
Dual-band (2.4GHz and 5GHz)
Antennas:
Four 5dBi external antennas
MU-MIMO:
Yes
Mesh:
Yes (EasyMesh compatible)
Ports and buttons
Gigabit Ethernet:
1 WAN and 3 LAN ports
USB:
1x USB 2.0 port for media sharing
Buttons:
WPS/Mesh, Reset
Security and management
Security:
WPA/WPA2/WPA3 encryption, SPI firewall, MAC and IP filtering
VPN Support:
PPTP, L2TP, IPsec passthrough
QoS:
Smart QoS engine
Management:
Web-based setup wizard and WEB GUI
Other features
Operating Modes:
Router, Access Point, Repeater, Client
Power:
12V/1A adapter
Device Interfaces
Wireless N 300Four 10/100 LAN ports10/100 WAN (Internet) port
Antenna
Two 5 dBi external antenna
Standards
IEEE 802.11n/g/bIEEE 802.3IEEE 802.3uIEEE 802.3x
LEDs
Power LEDInternet LED
Minimum System Requirements
Windows 8/7/Vista/XP SP3, or Mac OS X 10.4 or higherMicrosoft Internet Explorer 7, Firefox 12.0, Chrome 20.0,Safari 4.0, or other Java-enabled browserNetwork interface cardCable or DSL modemSubscription with an Internet Service Provider
Security
WPA & WPA2 (Wi-Fi Protected Access)Wi-Fi Protected Setup (WPS) - PIN
Advanced Features
Web setup wizardUPnP supportActive firewall - Network Address Translation (NAT)Repeater mode
Hardware specifications
Ports:
1 x 10/100Mbps LAN/WAN Port, 1 x 10/100Mbps LAN Port, 1 x Micro SIM Card Slot
Wireless speeds:
Up to 300 Mbps on 2.4 GHz
Antennas:
2 x Detachable external 4G LTE antennas
Buttons:
WPS/Reset button
Dimensions:
6.06 × 4.49 × 1.42 inches (154 × 114 × 36 mm)
Wireless features
Wireless standards:
IEEE 802.11b/g/n
Frequency:
2.4 GHz
Wireless security:
64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Network type and software
Network type:
4G FDD-LTE/TDD-LTE and 3G HSPA/UMTS
Operating modes:
3G/4G Router, Wireless Router
Security:
IPv4 SPI Firewall, IP and MAC Address Binding
WAN type:
Dynamic IP/Static IP/PPPoE/PPTP (Dual Access)/L2TP (Dual Access)
Management:
Local and Remote Management, DHCP server, Dynamic DNS
Guest network:
Yes, 2.4 GHz guest network
LTE performance
Download speed:
Up to 150 Mbps
Upload speed:
Up to 50 Mbps
Additional features
Easy setup:
Plug-and-play with no configuration required when using a compatible SIM card
WAN failover:
Allows for a fallback to an Ethernet WAN connection if the 4G connection is lost
SIM card compatibility:
Works with SIM cards from over 100 countries
Hardware specifications
Ports:
16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots.
PoE Power Budget:
250W total.
Maximum PoE Power per Port:
30W for each PoE+ port.
PoE Standard:
Compliant with IEEE 802.3af/at standards.
Switching Capacity:
36 Gbps.
Packet Forwarding Rate:
26.78 Mpps.
MAC Address Table:
8K.
Packet Buffer Memory:
4.1 Mbit.
Jumbo Frame:
10 KB.
Physical:
Rackmount with a durable metal casing.
Advanced functions
QoS:
Supports 802.1p/DHCP QoS for traffic prioritization.
Intelligent Power Management:
Automatically cuts lower-priority port power to prevent overload when the total power consumption exceeds 250W.
PoE Auto Recovery:
Ports 1-16 can automatically detect and recover from PoE power issues.
Extend Mode:
Ports 1–4 can extend PoE power and data transmission up to 250 meters.
Priority Mode:
Ports 1–4 can be set to Priority Mode for sensitive traffic.
Isolation Mode:
Ports 1–8 and 9–16 can be isolated from each other to prevent network loops.
Other specifications
Power Consumption:
19W (without connected PDs), 293.34W (with 250W PD connected)
Operating Temperature:
050 °C050
Certifications:
CE, FCC, RoHS.
